Wholesale Car Engine Timing Chain Guide Manufacturers

Home / Products / Timing Chain Guide

// Product Categories

// Recommended Products

  • Hyundai timing chain guide 1022
    Hyundai timing chain guide 1022

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1023
    Hyundai timing chain guide 1023

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1027
    Hyundai timing chain guide 1027

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1030
    Hyundai timing chain guide 1030

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1031
    Hyundai timing chain guide 1031

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1033
    Hyundai timing chain guide 1033

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1034
    Hyundai timing chain guide 1034

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1038
    Hyundai timing chain guide 1038

    Category: Hyundai timing chain guide

  • Hyundai timing chain guide 1039
    Hyundai timing chain guide 1039

    Category: Hyundai timing chain guide

The timing chain guide is used as the track or guide of the timing chain to connect the crankshaft and camshaft. Make the chain operate more stably and reduce the noise and damage of the chain and sprocket chain. Keep the engine timing belt and engine timing chain with a proper supporting force, that is, it is not easy to be damaged due to too loose and chattering teeth are not easy to be damaged due to too tight.

Car Engine Timing Chain Guide Manufacturers

Huzhou Jingtong Auto Parts Manufacturing Co., Ltd is China car engine Timing Chain Guide manufacturers and OEM car engine Timing Chain Guide factory. We focus on auto engine timing chain kits, including timing chains, tensioners, guides, and gears. Our products are used for auto engine timing system parts. We have two our own manufacturing factory, we also have our own international sales department. we produce and sell all by ourselves. We will reply to you within 12 hours of the working day.

Honor & Certificate

  • GB/T14212-2003 Certificates
  • JB/T10348-200 Standard
  • GB/T14212-2003 Certificates
  • JB/T10348-200 Standard
  • GB/T14212-2003 Certificates
  • JB/T10348-200 Standard
  • Certificates
  • Certificates

Lastest News

Timing Chain Guide Industry Knowledge Extension

Huzhou Nanxun Jingtong Auto Parts Manufacturing Co., Ltd. is a China-based Car Engine Timing Chain Guide Manufacturers and OEM factory. We produce timing chain guides as part of a complete engine timing chain system: chain, sprocket, tensioner and guide. Our guide range covers 417 catalogue items across universal and vehicle-specific applications, and we build to customer drawings or samples.

What a Timing Chain Guide Does in the Timing System

The guide is the track that carries the timing chain between the crankshaft and camshaft sprockets. It holds the chain in a controlled path, keeps the chain seated on the sprocket teeth, and works with the tensioner to maintain supporting force. A guide that is too loose lets the chain chatter and wear the sprocket; a guide that is too tight loads the chain and the tensioner.

Because the guide is a wear part, its material, surface finish and mounting geometry decide how long the timing system stays quiet and in phase. We manufacture guides in reinforced engineering plastic with a metal backing where the application requires it, and in alloy steel for high-load positions.

Our Timing Chain Guide Range

Our guide programme is organised so that a distributor or engine rebuilder can source a single guide or a complete timing set from one factory. The range below shows where each group fits.

Guide Group Typical Application Position in the System
Universal timing chain guide Workshop and aftermarket repair where a matched guide is not available Fixed or adjustable track section
Ford, Jeep, Chrysler, Dodge, Lincoln North American petrol and diesel engines Camshaft and crankshaft guide rails
Toyota, Nissan, Mazda, Mitsubishi, Suzuki, Honda Asian four-cylinder and V6 engines Long curved guide and short tensioner guide
Volkswagen, Audi, Benz, BMW European turbocharged and direct-injection engines High-temperature guide rails with metal inserts
Hyundai, Fiat, Land Rover, Chery Korean, Italian, British and Chinese vehicle platforms Full guide set for timing chain service

Materials and Construction

We use quality alloy steel with high carbon and chromium content for the metal components in the timing system, and reinforced engineering plastic for guide faces where the original design calls for it. Production follows GB/T14212-2003 and JB/T10348-200 standards under a controlled quality management system.

  • Guide face: low-friction plastic or reinforced nylon to reduce chain noise and sliding wear.
  • Backing and inserts: steel or aluminium reinforcement at mounting points and high-load bends.
  • Mounting features: bolt holes, locating pins and pivot points machined to the drawing tolerance.
  • Surface condition: smooth chain contact path with no flash, burrs or sharp edges.

Application Fit and Engine Conditions

Guide selection depends on the engine, not only on the vehicle model. Turbocharged and direct-injection engines run higher chain speeds, higher oil temperatures and stronger chain impact than naturally aspirated engines, so the guide material and reinforcement have to match that duty. For these engines we supply guides with heat-resistant faces and metal-backed stress points.

For a complete timing repair, the guide is normally replaced together with the chain, tensioner and sprockets. Our Timing Chain Kit 0121 range groups these parts by engine family so that the guide, chain and tensioner are matched before they leave the factory.

Critical Specifications We Control

Every guide batch is checked against the drawing and the mating chain. The dimensions below are the ones that decide whether the part runs quietly and holds timing.

Specification Why It Matters
Chain contact radius and profile Controls chain path and prevents lateral swing
Mounting hole position and diameter Determines fit on the block and correct alignment
Overall length and thickness Sets the working clearance with the tensioner
Material grade and hardness Resists wear and deformation under load
Surface finish on the guide face Reduces friction, noise and chain elongation

Quality Control and Inspection

We inspect after each production process and carry out 100% inspection of finished guides against customer requirements and the applicable standard. Our testing lab includes a spectrometer, metallographic microscope, tension tester, low temperature tester, X-ray tester, MPT, UT, CMM and video measurement machine. These instruments let us verify chemical composition, mechanical properties, non-destructive condition and dimensional accuracy before packing.

For projects that need documented acceptance, we agree the inspection items, sampling plan and record format with the customer before the first batch. Guides are checked for chain seating with a known-good chain length, which catches profile and pitch problems that a dimensional check alone can miss.

Customization and OEM Supply

We develop and produce guides according to customer drawings or samples. Our engineering team reviews the sample or drawing, confirms the material and mounting geometry, and prepares a proposal with the guide dimensions, material specification and inspection plan. Custom work covers:

  • New guide profiles for engines not yet in our catalogue.
  • Material changes for high-temperature or high-load applications.
  • Private-label packaging and part numbering for distributors.
  • Matched guide, chain and tensioner sets for a single engine family.

Information We Use to Configure Your Solution

To quote a guide or a complete timing set accurately, we need the engine and the working conditions, not only a part number. The list below is what our sales and engineering team uses to prepare a configuration and quotation.

  • Vehicle make, model, engine code and year range.
  • Original part number or a sample guide for reverse engineering.
  • Drawing with dimensions, tolerances and material specification, if available.
  • Engine type: naturally aspirated, turbocharged or direct injection.
  • Required quantity, packaging and delivery port.
  • Inspection and documentation requirements for the batch.

Related Timing System Products

Guides are supplied on their own or as part of a matched timing system. Our related ranges include the Ford 3.5 4.0 Car Engine Timing Chain Kit and the Toyota K3Ve Car Engine Timing Chain Kit, both of which include guides matched to the chain and tensioner in the set.

Frequently Asked Questions

Do you manufacture timing chain guides or only supply them?

We manufacture them. Huzhou Nanxun Jingtong Auto Parts Manufacturing Co., Ltd. operates two manufacturing factories and an international sales department, and we produce and sell our timing chain system parts directly.

Can you produce a guide from a sample or drawing?

Yes. We develop and produce guides according to customer drawings or samples, including new profiles and material changes for specific engine conditions.

Which vehicle brands does your guide range cover?

Our catalogue covers universal guides plus Ford, Jeep, Chrysler, Dodge, Toyota, Nissan, Mazda, Mitsubishi, Suzuki, Honda, Hyundai, Volkswagen, Audi, Benz, BMW, Fiat, Land Rover and Chery applications.

How is guide quality checked before shipment?

We inspect after every process and carry out 100% inspection of finished guides. Our lab equipment includes a spectrometer, metallographic microscope, tension tester, low temperature tester, X-ray tester, MPT, UT, CMM and video measurement machine.

What is your production capacity for timing chain guides?

Our annual production capacity is over 5,000,000 single parts across the timing chain system, which covers guides, chains, tensioners and sprockets.

How do you ship timing chain guides?

We ship by sea from Ningbo and Shanghai ports, which are close to our Tongxiang factory. Air shipment through Ningbo and Shanghai airports is available for urgent orders.

CHAO
whatsapp
PHOEBE
whatsapp
JOEY
whatsapp